Section by UCS

        Ribbon: Point Clouds – Clip and Section – Section >  Section by UCS

        Menu: Point Clouds + 3DScan – Section >  By UCS

        Toolbar: Clip and Section 3DScan >  By UCS

 Command line: PC_SECT_UCS

 

The command creates section parallel to one of coordinate plane (select plane through options in the command line).

Create section by UCS:

       

1.      Run the Section by UCS command.

2.      Specify view port to create section from (if there are several view ports).

3.      Specify viewport to create section there (if there are several view ports).

4.      Choose an option in the command line to specify the coordinate plane parallel to the section plane (XY is default):

Choose coordinate plane parallel to the section plane [XY/XZ/YZ] <XY>

5.      Set the distance from the origin along a coordinate axis in the drawing units. 0 is the default value.

6.      Specify half the total section depth in drawing units (the distance from the central plane to one of the boundaries). 1 is the default value.

7.      Set an angle between the section plane and the selected coordinate plane (XY, XZ, YZ). 0 is the default value (i.e. the section plane is parallel to the coordinate plane).